Porting a fax number for the Sinch Fax API works the same way as porting any other number to Sinch. This article covers only the steps that are specific to fax.
Where do I start?
- In the dashboard: follow Number Porting for USA/Canada.
- Through the API: see the Porting API reference.
- US toll-free numbers: see Sinch Letter of Authorization for Toll-Free Number Porting (US).
-
Numbers outside the US and Canada: contact Sinch Support.
How do I make sure the number works for fax after the port?
The number must be set to Fax and assigned to a fax service. You can do this in any of these ways:
- When you create the order in the dashboard: at the Routing step, assign the number to Fax.
- When you create the order through the API: on each number, set voiceConfiguration.type to FAX and voiceConfiguration.serviceId to your fax service ID.
-
After the port: follow How do I set a number to Fax?
How long does a port take?
It is not uncommon for a port order to take a few days or weeks. Brief service interruptions may occur during the port. Keep your service with your current carrier active until the port is complete.
My number was ported, but faxes are not arriving
Check that the number is set to Fax and assigned to a service, then send it a real fax to test. A voice call to the number will not play a fax tone, so calling it does not tell you whether it is working. If faxes still do not arrive, see Why are my Sinch Fax API inbound faxes failing?
How do I port a number away from Sinch?
Start the port with your new carrier and give them the number's port-out PIN. If you set a PIN with newPortOutPin when you ported the number in through the API, use that PIN. You can set newPortOutPin when you create a port-in order through the API, or update it while the order is still pending. It can't be set or changed through the Porting API after the port is complete. If you did not set one, or no longer have it, contact Sinch Support with the phone number and your Project ID. Port-out requests are handled within 24 hours.
Comments
0 comments
Please sign in to leave a comment.